When you fire up a synth for the first time, it’s inevitable that you’ll attempt to get an idea of its capabilities by playing some of the presets. However, if this is all you ever do and you never attempt to program any custom sounds of your own, you’ll be missing out.

Synth programming can be daunting if you’ve never done it before, so here are eight handy tips to help you get started.

1. Think before you act

Even the most basic subtractive synth can be a deceptively involved instrument to program. Synthesisers welcome experimentation, but very often it can be helpful to take a step back and consider how a sound you want to program would be constructed before you actually start doing it.

As a square wave has a hollow tone, it makes a good starting point for synthesising woodwind-like instruments, for example, whereas a saw wave has a much smoother tone, which makes it particularly good for emulating string-like instruments.

Another thing to consider might be how the tone of the instrument changes over time, and how you can make that happen with the filter and filter envelope sections.

2. Reach new depths

Acoustic instruments and sounds in nature aren’t static things – they tend to shift, dance around and evolve continually. If you loop a single wave from a recording of a human voice, a string instrument, or even an analogue synth, you tend to get an unnaturally colder, synthetic-sounding result, which may or may not be what you’re looking for.

It’s always worth thinking about ways in which you can add subtle, natural movement to your synthesised sounds. One of the most effective it is to set your synth’s LFOs up to modulate parameters like oscillator pitch, filter cutoff and pulse width modulation.

3. Multiple oscillators

Another good way to add depth and richness to your synth patches is to use multiple oscillators slightly detuned against each other. If you were making a two-oscillator string sound, say, you might choose to detune one oscillator up 5 cents, and the other down 5 cents.

For even thicker sounds – especially big trance-style synth chords – you could use more oscillators and a greater range of detuning. Some synths offer a unison mode, which multiplies the number of voices your synth uses for each note and enables you to choose the degree of detuning.

4. Strike a chord

Coarse detuning can be used to add even more thickness to your synth sounds, as well as creating interesting melodic effects. The simplest way to add weight to a synth sound is to add an oscillator and tune it down an octave (-12 semitones). Many synths also feature a dedicated sub-oscillator for adding a simple tone tuned, typically, an octave or two down.

Tuning an oscillator up +7 semitones gives the classic open fifth sound. This can be very effective with lead sounds and pads, particularly when playing big chords.

5. Express yourself

You can make your patches much more expressive and organic by assigning synth parameters to the various MIDI controllers sent out by your keyboard. Vangelis’ legendary Blade Runner and Chariots of Fire soundtracks featured some highly expressive synth sounds, courtesy of the Yamaha CS80. That synth was famous for its polyphonic aftertouch, which gave the player very expressive fingertip control over parameters like cutoff frequency on sustained notes and chords.

By assigning filter, envelope, oscillator and effects parameters to note velocity, aftertouch and any other controls that your keyboard outputs, you can create patches that morph and evolve with your playing.

6. Layer up

To make your leads, basses and chords really stand out, try layering multiple synth parts on top of each other to form much larger, multi-voice sounds. This can usually be done by setting a number of MIDI tracks in your sequencer to the same MIDI channel, then a plug-in synth into each one.

It’s a common trick in genres like drum ‘n’ bass and dubstep, where the bass needs to carry the tune. Layering a distorted, mid-range bass sound or two with a deep, low sub-bass from another synth can help you create huge bass sounds that fill out a broad range of frequencies.

7. Take control

Sometimes the best way to program a soft synth is to ignore the screen and just play around with the dials. Of course, this isn’t really an option when you’re relying on a mouse or touchpad, so it’s a good idea to invest in a hardware MIDI controller, then assign your synth’s various parameters to its rotary dials, faders and buttons. This also makes it much easier to use the synth as a performance instrument, on which you can manipulate filter or effects settings in real-time to increase the expressiveness of your playing.

8. Don’t neglect effects

Effects processes are an important part of synthesis. Adding a chorus will not only widen a sound in the stereo field, but can turn a simple string sound into a whole string section. Distortion can be used subtly, to add additional harmonics, energy or growl to the upper mid-range of a sound, or less subtly, emulating a guitar being overdriven into a guitar amp, for example.

Modular synthesisers expand the scope of what you can do with effects by enabling you to integrate them more deeply into the architecture of your patches. For example, adding distortion to an oscillator before it’s sent to a filter is a classic technique for producing big synth leads.

Quality Music radio: DATABLENDER FM

4410
Tv

PressPausePlay

5228
Tv

How to create wide open mixes

6853
Production

Seven ways to reduce noise

8714
Production

Mixing - the 12 step program

8111
Production

Arrangement 101

5643
Production

Tips for mixing the low end

5894
Production

The audible frequency range

6320
Production

Mastering basics for musicians

7472
Mastering

10 questions about mastering your recordings

5873
Mastering

Preparing your mixdown for mastering

5688
Production

Tips for mixing for vinyl

9921
Production

Gez Varley

7036
Interview, synthience

Viktoria Rebeka

5402
Interview, synthience

Andy Wonderland

4898
Interview, synthience

Andrea Suglia

5372
Interview, synthience

Mikrokristal

6316
Interview, synthience

Luke Hess

5721
Interview, synthience

Stereo editing and mastering

5904
Mastering

Preparing music for mastering

5884
Mastering

How the professionals do it

5537
Mastering

Audio mastering in your computer

6074
Mastering

T-Racks mastering audio techniques

10810
Mastering

Digital audio editing

5944
Production

6 mono to stereo methods

5547
Production

Outboard processing

5444
Production

Mixing on headphones

5897
Production

Using the side-chain

4985
Production

Watch your levels

5175
Production

Parallel compression

5718
Production

The sub-kick trick

6536
Production

5 perspective tips

5291
Production

Vocals in the Mix

5365
Production

Panning Tips

5961
Production

Using Compression

5348
Production

Tech Talk - Sherman Filterbank

7620
Tv

Tech Talk - Funktion One

6735
Tv

The Creation of Techno Music

5983
Tv

Mixing for vinyl record

6025
Production

20 tips on home mastering

6946
Mastering

18 ways to give your music groove

8479
Production

23 tips for better home recordings

7769
Production

48 ambient production tips

14287
Production

30 EQ techiques

9300
Production

35 music production pro tips

9565
Production

Pre master levels

11229
Mastering

9 mastering tips for beginners

9789
Mastering

20 tips on music mixing

8382
Production

8 synthesis tips for beginners

7674
Production

Your guide to frequency

16271
Production